Expo info

Category brief summary: 展会新闻
Our company successfully participated in 2019 south China international printing exhibition
Our company successfully participated in 2019 south China international printing exhibition
搜索
Search
>
>
Automatic Card Slitting&Collating machine

Service

设备保养

Automatic Card Slitting&Collating machine

(Summary description)Fully automatic special slitting machine involves machinery and electricity, Gas, hydraulic and other contents. In order to ensure the normal operation of the equipment, reduce the failure rate and im

Automatic Card Slitting&Collating machine

(Summary description)Fully automatic special slitting machine involves machinery and electricity, Gas, hydraulic and other contents. In order to ensure the normal operation of the equipment, reduce the failure rate and im

Information

Fully automatic special slitting machine involves machinery and electricity, Gas, hydraulic and other contents. In order to ensure the normal operation of the equipment, reduce the failure rate and improve labor productivity. Please pay attention to the following questions:

1. The main motor reducer is filled with 180#~220# industrial gear oil. After the new machine is used for one month, all the lubricants in the reducer are replaced. When the machine is maintained every week, the amount of oil is checked through the observation window of the reducer and added as appropriate. Then the lubricants are replaced once a year.

2. The lubricating oil of air compressor is special air compressor oil. After using the new equipment for one month, all the lubricants will be replaced with new ones, and the amount of oil will be checked weekly and added as appropriate. Then the air compressor oil is replaced once a year.

Attention: Air compressor storage tank should discharge water at least once a day.

3.There are four suction nozzles on Feeder which are cleaned once a month.

4.The valve spool of the air distributor is cleaned once every 3 months.

5. There are four cams on the slitting machine, paper-foot cam, point cam, duplicate cam and layered duplicate cam, refueling once a day.

6. There are eight universal joints on the slitter, refueling once a day.

7. Rubber roller are cleaned once a day.

8. The steel rods under the inclined rolls and rubber rolls are cleaned once a week.

9. All chains are cleaned and refueled once a week.

10. There are two pairs of bevel gears on the slitter and refueled once a week.

11. Check the tension of each chain once a week and adjust the tension wheel appropriately.

12. Paper collecting department, push bracket guide rail groove after each shift, clean up.

13. Equipment not used for a long time (3 days or more)

   A. Pull the rubber roller pressure down to the spring does not work to prevent deformation of the rubber roller.

   B. All steel balls are taken out and immersed in oil to prevent rust.

   C. The oblique roll part uses paper conveying tape to transfer power and loosens the tensioning wheel of the paper conveying tape.

14. When refueling each part, pay attention to that the toothed belt can not be stained with oil, otherwise the synchronous belt is easy to break.

15. The rod end joint bearing (paper collecting part) is refueled once a day.

16. Fuel the ratchet and pawl once a day with a small amount.

17. The sliders at both ends of the rubber rollers are refueled once a day with a small amount.

18. Check whether the blade is damaged and replace it in time when the machine is maintained every day.

19. Check whether the tape joint is in good condition during weekly machine maintenance.

20. High temperature grease is added regularly to the air pump.

21. Linear bearings of automatic angle cleaner are greased every two days. The air pressure of push plate cylinder is generally adjusted to about 0.15Mpa. After each addition of grease, the air pressure is increased to about 0.25-0.3 Mpa, and then to 0.15 Mpa when the cylinder is flexible.

22. When machine maintenance, attention: Servo motor tail strikes strictly prohibited!!

Do you have questions about projects or our products and services?

logo

PROVIDING VALUE ADDING SOLUTION TO CUSTOMERS

Add.:Xinxing Industry Zone,Yutian,Tangshan,Heibei,China

Yutian UANCHOR Packaging Machinery Co., Ltd. 冀ICP备09039892号 Powered by www.300.cn