FZ1700 Pile Turner
FZ1700 Pile Turner
The equipment is mainly used in printing, packaging and processing industries. It is used for dedusting, loosening, aligning and turning of paper stacks. It is an indispensable equipment to improve the efficiency of printing and post-printing process.
This machine can remove the impurities such as paper fibers,paper scraps and printing powders.
Before printing,this machine can improve printing quality and reduce the defection rate about 80%.
After printing,this machine can remove the printing powders,give a fast dry to the ink and prevents sticking together as well as paper back pollution.
It can stop impurities such as paper fibers,paper scraps go into printing machine and then increase the service life of printing machine.
Through vibration and blowing, it can play the role of loose paper, reduce the adhesion of double sheets and paper, reduce the number of downtime, and improve production efficiency.
Vibration tray and high-pressure air blowing device can make the whole paper neat at one time, instead of manual yard paper.
The whole stack of paper flips over the back and prints again. Artificial paper-turning consumes a lot of physical energy. It can free employees from such heavy physical labor and create a better working environment for employees.
5.Extract bad products
In the process of vibration and blowing, the bad products in paper pile can be extracted.
6.High efficiency and easy operation
The average time is 3 - 5 minutes to complete the process of dedusting,aligning,loosing and turning
No professional operation is required.
1.Push the stack of paper into the pile turner with forklift machine as shown in the figure.
2.Turn over, rotate and tilt the flipper as shown in the figure.
3.Open the blowing and vibration buttons of pile turner, and dedusting the paper pile (remove paper wool, paper scraps, dust), loosing, aligning, and can be turned over.
Insert pictures of blowing and vibration
4.Turn the machine back, put it down, and take the paper stack away with forklift machine. As shown in the figure.
|Maximum Paper Pile (Containing Pallets)||1000KG||1400KG||2500KG|
|Maximum paper size||800×1200MM||800×1200MM||1200×1700MM|
|Maximum splint spacing||1440MM||1920MM||1840MM|
|Minimum splint spacing||680MM||920MM||920MM|
|Power Supply||3P 380V AC 50HZ|
Hydraulic oil 46﹟ in summer and 32﹟ in winter
Hydraulic tank capacity 12 liters
|Dimension Size||2370×2090×1890 MM||2900×2400×2200 MM||2550×2590×2590MM|
|Humidity||Dry ventilation with relative humidity not exceeding 50% without condensation|
|Ground||Ground Level, Foundation Strong|
Oil pump motor
High pressure blower
Hydraulic shunt valve